Epson Help Desk
FeedbackRoadmapAnnouncements
Epson Help Desk
   

How to Reset Epson L3110 Printer Using Adjustment Program


The Epson L3110 is a popular ink tank printer known for its efficiency and affordability. However, like most Epson printers, it has a waste ink pad counter that eventually reaches its limit, causing the printer to display a "Service Required" error. This prevents the printer from functioning until it is reset. The best way to resolve this issue is by using the Epson L3110 Adjustment Program, also known as the Resetter Tool.
This guide will provide a step-by-step process to reset your Epson L3110 printer using the Adjustment Program safely and effectively.

 👉👉 ✅ ✅ ✅ Live Chat With Us If You Have Any Issue ✅ ✅ ✅👈👈


Why Do You Need to Reset Your Epson L3110 Printer?

Epson printers use a waste ink pad to absorb excess ink during printing and cleaning cycles. When the waste ink pad counter reaches its limit, the printer will stop working and display the following error messages:
  • "Service Required"
  • "Ink Pad is at the End of Its Service Life"
Resetting the waste ink pad counter using the Adjustment Program allows your printer to continue functioning without replacing the ink pad immediately. However, if the ink pad is full, it is recommended to replace it to avoid ink overflow.

What You Need Before Resetting

Before you begin, ensure you have the following:
  • A Windows PC (The Adjustment Program works only on Windows)
  • Epson L3110 Adjustment Program (Resetter Tool)
  • A USB Cable to connect your printer to the PC
  • Printer Drivers Installed (Ensure that the Epson L3110 drivers are installed on your PC)

Step-by-Step Guide to Reset Epson L3110 Using the Adjustment Program


Step 1: Download the Epson L3110 Adjustment Program

You need to download the Epson L3110 Resetter Tool. This software is not provided by Epson officially but can be found on various third-party websites.

Note: Ensure you download the tool from a reliable source to avoid malware or viruses.
  1. Search for "Epson L3110 Adjustment Program download" in your preferred search engine.
  2. Download the zip file from a trusted website.
  3. Extract the file to a folder on your desktop using WinRAR or 7-Zip.

Step 2: Disable Antivirus and Windows Defender


Since the resetter tool modifies system settings, some antivirus programs may flag it as a potential threat. To prevent interruptions, temporarily disable your antivirus and Windows Defender.
  1. Go to Windows Settings > Update & Security.
  2. Click Windows Security > Virus & Threat Protection.
  3. Click Manage settings under Virus & threat protection settings.
  4. Turn off Real-time protection.
  5. Disable any third-party antivirus software.

Warning: Remember to re-enable your antivirus after the reset process is complete.

Step 3: Open the Adjustment Program

  1. Go to the folder where you extracted the Adjustment Program.
  2. Right-click on the AdjProg.exe file and select Run as Administrator.
  3. The program interface will open.

Step 4: Select Your Printer Model

  1. Click Select in the program.
  2. Choose Epson L3110 from the Model Name list.
  3. Select Auto Selection under Port.
  4. Click OK.

Step 5: Access the Waste Ink Pad Counter Reset Option

  1. Click Particular Adjustment Mode.
  2. Scroll down and select Waste Ink Pad Counter.
  3. Click OK.

Step 6: Reset the Waste Ink Pad Counter

  1. Check the boxes next to Main Pad Counter and Platen Pad Counter.
  2. Click Check to view the current counter values.
  3. Click Initialize to reset the counters to zero.
  4. Click OK when a confirmation message appears.

Step 7: Restart Your Printer

  1. Turn off your printer.
  2. Wait for about 10-20 seconds.
  3. Turn the printer back on.
The "Service Required" error should now be gone, and your printer should function normally.

 👉👉 ✅ ✅ ✅ Live Chat With Us If You Have Any Issue ✅ ✅ ✅👈👈



Troubleshooting Common Issues

If the reset process does not work, consider the following solutions:

1. The Adjustment Program Does Not Open

  • Run the program as an administrator.
  • Disable your antivirus or Windows Defender.
  • Ensure you have WinRAR or 7-Zip installed to extract the files properly.

2. Printer Is Not Detected by the Program

  • Ensure your printer is connected via USB.
  • Install the Epson L3110 drivers.
  • Restart your PC and try again.

3. "Communication Error" Appears

  • Use a different USB port or cable.
  • Close any other Epson-related applications running in the background.
  • Restart both the PC and printer, then retry the reset process.


FAQs


1. Is it safe to use the Epson L3110 Adjustment Program?

Yes, as long as you download it from a trusted source and follow the steps correctly. However, excessive resets without replacing the waste ink pad can cause ink overflow.

2. How often should I reset my Epson L3110 printer?

It depends on usage. Typically, the waste ink pad counter reaches its limit after printing thousands of pages. Reset only when the "Service Required" error appears.

3. Do I need to replace the waste ink pad after resetting?

Yes, if your printer has been reset multiple times, the waste ink pad might be physically full, causing ink to leak. It is recommended to replace or clean the ink pad periodically.

4. Can I reset my Epson L3110 without software?

No, the only way to reset the waste ink pad counter is by using the Epson Adjustment Program.

Conclusion

Resetting your Epson L3110 printer using the Adjustment Program is a quick and effective solution for the "Service Required" error. However, it is essential to monitor your waste ink pad's condition to prevent potential leaks. By following this guide, you can successfully reset your printer and extend its lifespan.
If the issue persists even after resetting, consider consulting an Epson service center for further assistance

  Follow us

If you are interested in hearing about new features in our product

Powered by 
ClearFlask